detail_9166_photo-not-available.jpg
detail_9166_photo-not-available.jpg

Rigol DP832 Triple Output 195 Watt Power Supply

SKU: DP832
Stock: 0
Price:
$450.00

Qty: - +
0 Review(s)

Features

  • 3 Outputs; total power up to 195W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Channel isolation: CH1 || CH2,CH3
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Support for output Delay, Analysis, Monitor, and Preset functions
  • 3.5 inch TFT Display
  • Connectivity including USB Host & Device, LAN, and Digital IO
  •  
  • Specifications
  • Model
      DP832
    Channels 3
    DC Output (0°C to 40°C )  
    Voltage/current CH1: 0 to 30V/0 to 3A
    CH2: 0 to 30V/0 to 3A
    CH3: 0 to 5V/0 to 3A
    OVP/OCP CH1: 10mV~33V/1mA~3.3A
    CH2: 10mV~33V/1mA~3.3A
    CH3: 10mV~5.5V/1mA~3.3A
    Load Regulation Rate ±(Output Percentage + Offset)
    Voltage <0.01%+2mV
    Current <0.01%+250uA
    Linear Regulation Rate ±(Output Percentage + Offset)
    Voltage <0.01%+2mV
    Current <0.01%+250uA
    Ripples and Noise (20Hz to 20MHz)
    Normal Mode Voltage <350μVrms/2mVpp
    Normal Mode Current <2mArms
    Common Mode Current <1.5μArms
    Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
    Programming Voltage 0.05% + 10mV
    Current 0.2% + 10mA
    Readback Voltage 0.05% + 5mV
    Current 0.15%+ 5mA
    Resolution
    Programming Voltage 10mV
    With high-resolution option:
    1mV
      Current 1mA
    Readback Voltage 10mV
    With high-resolution option:
    0.1mV
      Current 1mA
    With high-resolution option:
    0.1mA
    Display Voltage 10mV
    With high-resolution option:
    1mV
      Current 10mA
    With high-resolution option:
    1mA
    Transient Response Time
    Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
    Command Processing Time [2]
    <118ms
    Temperature Coefficient per? (Output Percentage + Offset)  
    Voltage CH1/CH2: 0.01%+5mV
    CH3: 0.01%+2mV
    Current 0.01%+2mA
    Stability [3] ±(Output Percentage + Offset)
    Voltage CH1/CH2: 0.02%+2mV
    CH3: 0.01%+1mV
    Current 0.05%+2mA