AUTHORIZED DISTRIBUTOR
TPI 135 Manual Ranging Digital Multimeter with Capacitance
Product Features
- Digital multimeter measures voltage, current, and resistance
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform
- Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit's diodes
- Hold function keeps a reading on the LCD, even after the meter is disconnected
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V
What's in the Box?
- TPI 133 average-sensing digital multimeter
- (1) Set test leads
- (2) 9V battery (installed)
- Rubber holster
- Instructions
Full size DMM with capacitance; 1,000 DC volts and 750 AC volts; 0.5% DCV basic accuracy
- 4,000 count display
- 0.5% DCV basic accuracy
- 0 to 750 ACV; max resolution 0.1mV
- 0 to 1,000 DCV; max resolution 0.1mV
- 0 to 40MΩ; max resolution 0.1Ω
- 0 to 10 amps AC/DC; 0.1uA resolution
- Data hold
Specifications:
- DC Volts
- Maximum Input: 1000V
- Maximum Resolution: 0.1mV
- Accuracy: +/-0.5%
- AC Volts
- Maximum Input: 750V
- Maximum Resolution: 0.01mV
- Accuracy: +/-0.8%
- DC Amps
- Maximum Input: 10A
- Maximum Resolution: 0.01µA
- Accuracy: +/-0.5%
- AC Amps
- Maximum Input: 10A
- Maximum Resolution: 0.01µA
- Accuracy: +/-0.8%
- Resistance (Ohms)
- Maximum Input: 40MΩ
- Maximum Resolution: 0.1Ω
- Accuracy: +/-0.75%
- Frequency: N/A
- Capacitance
- Maximum Input: 20000µF
- Maximum Resolution: 0.01µF
- Accuracy: +/-2%
- Inductance: N/A
- Temperature (K-Type Thermocouple): N/A
- Continuity: Audible at less than 100Ω
- Diode: 3V at 1mA maximum output
- Duty Cycle: N/A
- True RMS Responding: No
- Conductance: No
- Pulse Width: No
- Data Hold: Yes
- Min/Max Record: No
- Time Stamp Logging: No
- Relative Mode: No
- Compare Mode: No
- RS-232 Output: No
- Process Loop Output: No
- Sleep Mode / Auto Off: No
- Protective Boot: Yes (standard)
- Display Type: 4000 count LCD
- Range Selection: Manual
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: 14°F to 122°F (-10°C to 50°C)
- Humidity: 80% non-condensing
- Size: 7.4” x 3.4” x 1.2” (187mm x 86mm x 33mm) with boot
- Weight: 12oz (340g) with boot
- Battery Type: 9V Alkaline (NEDA 1604)
- Battery Life: 500hrs Typical
- Overvoltage Category: CAT III 600V
- Agency Approval: cULus 61010-1, IEC 61010-1
- Warranty: 3 Years
Applications:
- Thermocouples in furnaces or gas applications
- Heat anticipator current in thermostats
- Line voltage
- Voltage of direct drive DC motors
- Control circuit voltage
- Motor run and start capacitors
- Flame safeguard control current
- Heating element resistance (continuity)
- Compressor winding resistance
- Contactor and relay coil resistance
- Continuity of wiring
- Temperature w/ optional temperature adapter