AUTHORIZED DISTRIBUTOR
TPI 133 Manual Ranging Digital Multimeter with boot, test leads, battery and manual
Product Features
- Digital multimeter measures voltage, current, and resistance
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform
- Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit's diodes
- Hold function keeps a reading on the LCD, even after the meter is disconnected
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V
What's in the Box?
- TPI 133 average-sensing digital multimeter
- (1) Set test leads
- (2) 9V battery (installed)
- Rubber holster
- Instructions
Large easy to read display in full size DMM; 1,000 DC volts and 750 AC volts; 0.5% DCV basic accuracy
- Large easy to read 2,000 count display
- 0.5% DCV basic accuracy
- 0 to 750 ACV; max resolution 1mV
- 0 to 1,000 DCV; max resolution 0.1mV
- 0 to 20MΩ; max resolution 0.1Ω
- 0 to 10 amps AC/DC; max resolution 0.1uA
- Data hold
Applications:
- Thermocouples in furnaces and gas appliances
- Heat anticipator current in thermostats
- Line and control voltages
- Flame safety control current
- Heating element resistance
- Continuity of wiring
- Line current up to 10 amps
- Power supply current
Specifications:
- DC Volts
- Maximum Input: 1000V Maximum Resolution: 0.1mV Accuracy: +/-0.5%
- AC Volts
- Maximum Input: 750V Maximum Resolution: 0.01mV Accuracy: +/-0.8%
- DC Amps
- Maximum Input: 10A Maximum Resolution: 0.1µA Accuracy: +/-0.5%
- AC Amps
- Maximum Input: 10A Maximum Resolution: 0.1µA Accuracy: +/-1%
- Resistance (Ohms)
- Maximum Input: 20MΩ Maximum Resolution: 0.1Ω Accuracy: +/-0.5%
- Frequency N/A
- Capacitance N/A
- Inductance N/A
- Temperature (K-Type Thermocouple) N/A
- Continuity Audible at less than 100Ω
- Diode 2.5V at 1mA maximum output
- Duty Cycle N/A
- True RMS Responding No
- Conductance No
- Pulse Width No
- Data Hold Yes
- Min/Max Record No
- Time Stamp Logging No
- Relative Mode No
- Compare Mode No
- RS-232 Output No
- Process Loop Output No
- Sleep Mode / Auto Off No
- Protective Boot Yes (standard)
- Display Type 2000 count LCD
- Range Selection Manual
- Operating Temperature 32°F to 104°F (0°C to 40°C)
- Storage Temperature 14°F to 122°F (-10°C to 50°C)
- Humidity 80% non-condensing
- Size 7.4” x 3.4” x 1.2” (187mm x 86mm x 33mm) with boot
- Weight 12oz (340g) with boot
- Battery Type 9V Alkaline (NEDA 1604)
- Battery Life 500hrs Typical
- Overvoltage Category CAT III 600V
- Agency Approval cULus 61010-1, IEC 61010-1
- Warranty 3 Years