AUTHORIZED DISTRIBUTOR
TPI 390 TDS/Salt Meter
Measure Total Dissolved Solids (TDS), salt and temperature for food, water quality and HVAC maintenance. Easy-to-read LCD display. Measures temperature, TDS concentration and salt levels in solutions.
Product Features
- Measure total dissolved solids (TDS), salt and temperature for food, water quality and HVAC maintenance
- Easy-to-read LCD display
- LR44 or LR1154 button battery
- Aqueous solution measurement target
- Measures 10" lenght by 1-1/4" width by 21/32" height
| Salt Measurement | Measurement Method: Electric Conductivity Measurement System Measurement range: 0.001% to 5.0% Measurement Temp: 50°F to 104°F (10°C to 40°C) Measurement Temp. Range: 32°F to 158°F (0°C to 70°C) |
| Temperature Measurment | Measurement Range: 32°F to 212°F (0°C to 100°C) Measurement Accuracy: ±1°C (temp. range: 0°C to 70°C) of reading |
| TDS | Measurement Range: 0 to 999ppm (mg/L) Measurement Accuracy: ±3% full scale @ 20°C Excellent Temp. Range: 50°F to 86°F (10°C to 70°C) Measurement Temp. Range: 32°F to 104°F (0°C to 40°C) |
| Resolution @ 20°C | Salt Measurement: 0.01% to 0.1% TDS: 1ppm (mg/L) |
| Power Supply | LR44 or LR1154 Button Battery (x3) |
| Size | 16.4mm x 32mm x 255mm |
| Standard Accessories | Sensor protection cap, supporting spoon (2), NaCl standard solution (40g), manual, and batteries |
Applications
- Water: Test TDS levels to determine purity
- Food: Test the amount of salt in food, seafood, or processed foods
- Health: Monitor the amount of salt intake
- Water Filtration: Test for TDS to determine performance level of filtration systems
- Pools & Spas: Monitor TDS levels to prevent maintenance problems
- HVAC: Test condensate water in cooling tower and humidifier reservoir applications to prevent bacterial growth
- HVAC: Test TDS levels in make-up water to prevent scale formation, corrosion, and embrittlement
- HVAC: Reduce water and chemical consump tion in boilers and cooling towers
- HVAC: Determine when to perform blowdown and add make-up water
- HVAC: Prevent contamina tion and corrosion of control valves, heat exchangers, and steam traps
- HVAC: Verify automated TDS contollers are functioning properly
- HVAC: Prevent low quality wet steam generation in boilers due to foaming caused by high TDS levels
Product Description
Use for salt measurement, temperature measurement and TDS. 0.001 to 5.0 percent measurement range for salt, 32 to 212 degree F measurement range for Temperature and 0 to 999ppm measurement range for TDS. 0.01 to 0.1 percent resolution at 20 degree C for salt and 1ppm for TDS. Aqueous solution measurement target. Measures 10" length by 1-1/4" width by 21/32" height. RoHS compliant