AUTHORIZED DISTRIBUTOR
TPI 610 Single Input Manometer Single Input Manometer with ± 80 inH2O range and 0.01 in H2O resolution
Temperature compensated to ensure repeatable measurements. Over-pressure protected to 200 inH2O.
- +/-80 in H2O range, 0.01 in H2O resolution
- Autoranging provides high resolution & accuracy at low pressure where it is needed
- Auto power off
- Record/Min/Max
- Backlight display
- Zero function
- Trim mode to stabilize readings
Applications:
- Adjust appliance regulators
- Setting delivery pressures
- Leakage “shut-in” tests
- Replace messy U-tube manometers
- Test low pressure gas systems for leaks
- Regulator adjustments for pressure and lock-up tests
Specifications:
- inH20 ±80.29
- Resolution (max) 0.01 inH2O
- Accuracy +/-(0.5% of reading + 5 digits)
- Over Pressure 200 inH2O
- Power Supply 9V battery
- Operating Temp. 32°F to 104°F (0°C to 40°C)
- Operating Hum. 0% to 80%
- Storage Temp. 14° F to 122° F (-10°C to 50°C)
- Auto Off 20 minutes
- Input Type Single
- Trim Mode Yes
- Auto Zero Button Yes
- Min/Max Record No
- Units of Measure 1 (See range above)
- Data Hold No
- Backlight Display Yes
Auto Range | -15 to +48 inches of water |
Accuracy | ±0.5% of Reading + 5 digits |
Over Pressure | 500 mbar |
Power Supply | 9 Volt |
Relative Humidity | 0% to 80% (0° to + 40°) |
Operating Temp | 0°C to +40°C |
Storage Temp | -10°C to +50°C |
Auto Power Off | After 40 Minutes |
HVAC Equipment and Instruments/Manometer Template |
|
---|---|
Type (Manometer) | Digital |
Max Pressure | 1.734 psi (48.00 IN of H2O) |
Type of Input | Single |
Engineering Units (HVAC) | inch H2O |
Measurement | Absolute, Vaccum |
Test Equipment General Attributes |
|
Unique Features | smoothing function to stabilize rapidly changing pressure readings Single Input -15 to +48 inches of water, autoranging 500 mBar overpressure Displays inH20 only |
Warranty | 3 YEARS |
Power Supply Voltage | Battery Powered |
Safety Approval | CE, UL |
Battery Type | 9v |
Country of Origin | Korea |