AUTHORIZED DISTRIBUTOR
TPI 621 Dual Input Manometer, 0.001 inH2O resolution at less than 40 inH2O
High efficiency gas and oil fired furnaces along with condensing boilers requIre a manometer with 0.001 inches of water resolution to make proper adjustments
- 0.001 inH2O resolution at less than 40 inH2O; 0.01 inH2O resolution over 40 inH2O
- Enough range and resolution to perform low pressure and draft measurements on high efficiency gas and oil fired equipment.
- +/- 120 inH2O range, over-pressure protected to 200 inH2O
- Enough range for low side regulator adjustments and protection against pressure spikes
- Temperature compensated to ensure repeatable measurements
- Pressure measurement is not affected by ambient temperature
- Dual input differential
- Troubleshoot and setup two stage pressure switches
- Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg
- Enables equipment adjustments to be made easily
- Trim mode to stabilize readings
Applications:
- Adjust appliance regulators
- Setting delivery pressures
- Leakage “shut-in” tests
- Replace messy U-tube manometers
- Test low pressure gas systems for leaks
- Regulator adjustments for pressure and lock-up tests
- Test pressure switch operation on a 2-stage gas furnace in both positive and negative pressures
- Measure furnace and boiler draft
Specifications:
- inH20 ±120
- mbar ±300
- kPa ±30
- psi ±5
- mmH20 ±3,000
- mmHg ±220
- inHg ±9
- Resolution (max) 0.001 inH2O
- Accuracy +/-(0.2% of full scale)
- Over Pressure 200 inH2O
- Power Supply 9V battery
- Operating Temp. 32°F to 104°F (0°C to 40°C)
- Operating Hum. 0% to 80%
- Storage Temp. 14° F to 122° F (-10°C to 50°C)
- Auto Off 20 minutes
- Input Type Dual / Differential
- Trim Mode Yes
- Auto Zero Button Yes
- Min/Max Record Yes
- Units of Measure 7 (See range above)
- Data Hold Yes
- Backlight Display Yes