The Weller WD1M is a micro digital rework power unit compatible with WMRS soldering pencil and WMRT desoldering tweezers.
- Weller WD1M Features:
- ESD-safe to protect sensitive components
- Compatible with WMRS soldering pencil and WMRT desoldering tweezers
- Three "radio buttons" allows pre-set of frequently used temp settings
- Large high contrast LCD display
- Setback Time: Allows programming of the number of minutes (1-99), before the temperature sets back to idle mode
- Standby Temperature: Allows the selection of desired setback temperature, down to 200°F
- Temperature Lockout: Allows the supervisor to easily set a temperature that cannot be changed by the operator
- F°/C° Switching: Allows the temperature display to read in either °F or °C, depending on your process or preference
- Temperature Offset: Allows the display temperature to be adjusted ± 72°F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip
- Auto-Off Time: Allows programming of the number of minutes of inactivity (1-999), before the station powers off automatically
- Voltage: 120V (input); 24V (output)
- Footprint: 5.27" x 4.25" x 5.77" (134 x 108 x 147mm)
- Max Power Consumption: 160W
- Temperature Range: 150°F - 850°F (50°C - 450°C)
- Temperature Accuracy: ± 17°F (± 9°C)
Specification Name | Value |
Powers Resistance Soldering Tools | No |
Powers Standard Soldering Tools | Yes |
Powers Standard Desoldering Tools | No |
Powers Solder Pots | No |
Powers Hot Air Tools | No |
Nitrogen Controllers | No |
Voltage | 120V |
Other Information | Value |
Estimated Weight(lbs) | 7.385 |
Standard Carton Qty | 1 |
GSA/NSN Number | N/A |
Country of Origin | GERMANY |