It will simultaneously control temperature either of the two sizes of soldering iron and desoldering handle, or control both soldering irons. Based on the principle of vacuum absorption of the solder from P.C board. Easy desoldering the tin by reversing the vacuum to positive air flow. 2 position switch that shifts the control board from desolder to solder allowing the concurrent operation of 2 irons. Suction nozzle and the thermal pipes are exclusively designed for suction of filters with the soldering tin in fusion. No regular mainteneance required, for optimal performance. Easy to clean. Filter tube is made of heat-resistant glass for a clear view of the suction. Combined powerful suction tin gun and high- performance welder for optimal repair works. Both tin suction and gun and the welder come with an output voltage of 24 V., to keep the surface board from being burnt. Temp. Setting Range: Soldering: 150-420 deg.C ,(300-790 deg.F) Desoldering: 210-480 deg.C, (410-900 deg.F) Specifications: Voltage: 110V AC/60H Power Consumption:50W Heater Operating Voltage: 24V, AC Vacuum pump:-500mmHG 24V AC AC Power cord: 3 pin plug 180cm.(70"). Station-Hand piece cord length: 115cm (45"). Weight: 5.3Kg. (11 1/2lb Copyright © 2002 ::: Omnitronelectronics All Rights Reserved.