Instek GOS-6030 Oscilloscope

The GOS-6000 Series Analog Oscilloscopes provides a remarkable combination of high performance and compact design in bandwidth ranging between 30 and 50 MHz. Coupled with various trigger functions, waveforms can be acquired and observed in diverse application fields. Signals can be magnified by a ratio of x5, x10 and x20 in the use of the ALT MAG function. Together with the Cursor Readout and Frequency Counter functions (GOS-6051/6031), the GOS-6000 Series offers tremendous value for your investment in testing and analysis.

2 Channels, 4 Traces:
DC~50M/30MHz Bandwidth
1mV/div ~ 20V/div 
CRT Readout 
Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall(GOS-6051/6031) 
ALT, MAG Function (x 5, x 10, x 20) 
Vertical Mode Triggering 
TV Synchronization 
Buzzer Alarm & LED Indicators

SPECIFICATIONS
CRT	Type	6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
	Accelerating Potential	GOS-6051/6050 approx.10kV GOS-6031/6030 approx.2kV
	INTEN and FOCUS	Front panel control
	Illumination	Provided (GOS-6031/6051)
	Trace Rotation	Provided
	Z-axis input	Sensitivity: at least 5V
		Polarity: positive going input decrease intensity
		Usable frequency range: DC to 2MHz
		Maximum input voltage: 30V (DC+AC peak) at 1kHz or less
		GOS-6051/6050 Input impedance: approx. 33k£[ GOS-6031/6030 Input impedance: approx. 47k£[
VERTICAL SYSTEM	Sensitivity and Accuracy	1mV ~ 2mV/DIV + 5%, 5mV ~ 20V/DIV + 3%, 14 calibrated steps in 1-2-5 sequence
	Vernier Vertical Sensitivity	Continuously variable to 1/2.5 or less panel indicate value
	Bandwidth (-3dB) and Rise Time	Bandwidth(-3dB) Rise Time GOS-6051/6050 5mV ~ 20V/DIV DC ~ 50MHz Approx. 7nS 1mV ~ 2mV/DIV DC ~ 7MHz Approx. 50nS GOS-6031/6030 5mV ~ 20V/DIV DC ~ 30MHz Approx. 11.67nS 1mV ~ 2mV/DIV DC ~ 7MHz Approx. 50nS
	Maximum Input Voltage	400V (DC + AC peak) at 1kHz or less
	Input Coupling	AC, DC, GND
	Input Impedance	1M£[ + 2% // approx. 25pF
	Vertical Modes	CH1, CH2, DUAL (CHOP, ALT), ADD, CH2 INV
	CHOP Frequency	Approx. 250kHz
	Dynamic Range	GOS-6031/6030:8 DIV at 20MHz, 6 DIV at 30MHz GOS-6051/6050:8 DIV at 40MHz, 6 DIV at 50MHz
HORIZONTAL SYSTEM	Sweep Time	0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous variable control between steps at least 1¡G2.5
	Accuracy	+ 3%, + 5% at x5, x10 MAG. + 8% at x20 MAG
	Sweep Magnification	x5, x10, x20 MAG
	Maximum Sweep Time (at MAG)	GOD-6051/6050: 20nS/DIV (10nS/DIV are uncalibrated)
		GOD-6031/6030: 100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated)
	ALT-MAG Function	Available
TRIGGER	Trigger Modes	AUTO, NORM, TV
	Trigger Source	VERT-MODE, CH1, CH2, LINE, EXT
	Trigger Coupling	AC, HFR, LFR, TV-V(-), TV-H(-)
	Trigger Slope	"+" or   "-" polarity
	Trigger Sensitivity	GOS-6051/6050 20Hz ~ 5MHz 5MHz ~ 40MHz 40MHz ~ 50MHz GOS-6031/6030 20Hz ~ 2MHz 2MHz ~ 20MHz 20MHz ~ 30MHz CH1, CH2 0.5 DIV 1.5 DIV 2.0 DIV VERT-MODE 2.0 DIV 3.0 DIV 3.5 DIV EXT 200mV 800mV 1V
		TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT)
	External Trigger Input	Input Impedance¡GApprox. 1M£[ // 25pF (AC coupling)
		Max. input voltage¡G400V (DC + AC peak) at 1kHz
	Hold-off Time	Variable
X-Y OPERATION	Input	X-axis¡GCH1¡FY-axis¡GCH2
	Sensitivity	1mV/DIV ~ 20V/DIV
	Bandwidth	X-axis¡GDC ~ 500kHz (-3dB)
	Phase Difference	3º or less from DC to 50kHz
OUTPUT SIGNAL
	Trigger Signal Output	Voltage¡G approx. 20mV/DIV (with 50£[ terminated)¡F Bandwidth¡G50Hz to at least 5MHz
	Calibrator Output	Voltage¡G0.5V + 3%¡FFrequency¡Gapprox. 1kHz,  Square wave
CURSOR READOUT	Panel Setting Display	CH1/CH2 sensitivity, sweep time, trigger condition
	Panel Setting Save & Recall (GOS-6031/6051)	10 sets
	Cursor Measurement (GOS-6031/6051)	Cursor measurement function¡G£GV, £GT, 1/£GT
		Cursor resolution¡G1/25 DIV¡F Effective cursor range¡Gvertial: + 3 DIV, horizontal: + 4 DIV
	Frequency Counter (GOS-6031/6051)	Display digits¡GMax. 6-digits decimel
		Frequency range¡GGOS-6051¡G50Hz ~ 50MHz¡FAccuracy¡G+ 0.01% Frequency range¡GGOS-6031¡G50Hz ~ 30MHz¡FAccuracy¡G+ 0.01%
		Measuring sensitivity¡Gmore than 2 DIV (measuring source selected from CH1 or CH2 as synchronous signal sources)
POWER SOURCE		AC 100V/120V/ 230V + 10%, 50/60Hz
ACCESSORIES		Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2
DIMENSIONS & WEIGHT		275(W) x 130(H) x 370(D) mm, Approx. 7.2kg