The 460 hand held oscilloscope features a 3” x 3” cold cathode fluorescent display providing test data in a clear easy to see format. The cursor readout function allows the width and amplitude of a signal to be measured precisely instead of trying to figure it out manually.

• 20 MHz Bandwidth
• Cursor Readout
• Decibels
• Pre and Post Triggering
• Trend Mode
• Dual Input
• True RMS DMM
• Real Time Sample Rate
• Bright LCD Backlight
• Optically Isolated RS232 Output
• Continuous Autoset

460 Specifications
DISPLAY
Size	3” x 3” (76mm x 76mm)
Pixels	240 x 240
Backlight	Yes
POWER
External	5V DC power supply (Included)
Internal	4.8V DC rechargeable battery
Operating Time	2.5 Hours with backlight on
Charging Time	10 Hours
MEMORY
Waveform	Save 2 full screens
Setup	Saves user settings
VERTICAL
Sample Rate (-3dB)	Real Time: 25 Megasamples per Second up to 2 MHz Equivalent Time: 500 Megasamples per Second > 2 MHz
Bandwidth	20 MHz w/SP60B 10:1 Probe 10 MHz w/Shielded Test Leads
Resolution	8 bits
Channels	2
Coupling	AC, DC AC, DC, GND (max: 750V)
Input Impedance	Approximately 1M Ohm
Sensitivity	50mV TO 200V/div 1,2,5 Sequence
Accuracy	± 3% ± (3% + 0.05 range/div)
Trigger Position	Ver1;Fixed Position / Ver3; Adjustable Position
Trigger Mode	Free Run, Normal
Trigger Source	Internal
Trigger Slope	Positive / Negative
Trigger Sensitivity	Equivalent Time: 3 divisions or more Real Time: 2 divisions or more
HORIZONTAL
Samples per Division	25
Time / Division	50nS to 500nS / DIV (equivalent times) 1uS to 2S / DIV (real time)
Modes	Single, Normal, Auto
Accuracy	Equivalent Time : ± (0.5% + 0.08 time/div) Real Time: ± (0.1% + 0.04 time/div)
TREND MODE
Plot Time	30 sec/div to 1 hour/div
Plot Data Type	Max/Min Selectable
Memory	2 Screens
TRUE RMS DMM
DCV (CH1, CH2)	400mV, 4, 40, 400, 600V
Basic DC Accuracy	± (0.5% + 5 digits)
ACV (CH1, CH2)	400mV, 4, 40, 400, 600V
Basic ACV Accuracy	± 0.75% ± (1% + 10 digits)
Frequency (CH1, CH2)	1 Hz to 20 MHz
Basic Frequency Accuracy	± (0.5% + 5 digits)
Ohm (CH1 only)	400, 4k, 40k, 400k, 4M, 20M
Basic Ohm Accuracy	± (0.5% + 5 digits)
Continuity (CH1 only)	< 0.1k ohm, ± (2% + 5 digits)
Diode Test	5mA maximum output

460 Applications
Power Quality
Variable Speed Drives
Industrial Motor Controls
Battery Testing
Programmable Logic Controls
NC/CNC Machines
Uninterruptable Power Supplies
Audio
Video
Industrial Lighting Controls
Factory Automation
Line Conditioners
Voltage Regulators
Inverters
Gaming Industry

Oscilloscopes FAQs

Where do I use your oscilloscopes? They are ideal for viewing industrial power signals, UPS systems, power supplies and PLC controls. Use anywhere a DMM is used. Does the oscilloscopes measure capacitance? Yes, the 440 can measure up to 400uF (microfarads). What is the highest voltage the oscilloscopes can measure? They can measure up to 1,000 DCV and 1,000 ACV. What is the lowest voltage the 440 can measure? The 440 can measure down to 0.1 millivolts on both DCV and ACV. The scope also has a volts/division setting of 0.1 volts. How is the RS232 port used? With the optional A402 cable and software you can acquire data and download it to a spreadsheet. Can your oscilloscopes measure more than 10 DCA or ACA? Yes, TPI offers a number of amp adapters to extend the range up to 1,000 amps. TPI has a wide range of optional accessories that enables the user to measure amps, temperature, pressure, or CO. Why do you need a 20 MHz oscilloscope (460)? To measure signals and voltage anomalies, and to look for glitches that may damage or even shutdown electronic machinery. View sine waves on power supplies, motors, and bead board circuitry. Pinpoint certain glitches on the sine wave to zero inon the problem and monitor changing patterns or distortion in electrical currents. What are the different waveform patterns displayed on your handheld oscilloscopes? An AC waveform known as sine wave displays voltage against time in the shape of a sine curve. The saw toothwave form displays a ramped angleand a sharp downward return to its earlier value. (Its display pattern resembles the cutting edge ofa saw.) A square waveform graphically plots a series of vertical square shapes repeated with spacing between peaks. Why is it important to have Trend Mode? Trend Mode is great for monitoring sudden intermittents caused by loose connections, dirt, or damaged wires. By setting the minimum and maximum parameters, you can monitor, even record the changes. What is the purpose of triggering? Simply zoom in on certain parts of the sine wave and “hold” to measure and monitor that particular part you are reading. A must have when searching for glitches and distortion on all measurements.

 Instruction Manual

Related Products

TL-12 TEST LEADS Stackable Banana To Mini Grabber SKU: TL-12 Price: $5.99	TPI A006 NI-mh battery pack for 460 Scope SKU: A006 Price: $49.95	TLM3 SET OF TEST LEADS - BANANA PLUG / BOOTED ALLIGATOR PLUG SKU: TLM3 Price: $3.99
TL-7 TEST LEAD BNC TO BNC SKU: TL-7 Price: $2.95	TL-4 TEST LEAD Stackable Banana To Test Probe SKU: TL-4 Price: $2.99	TL-18 TEST LEADS Stackable Banana To Banana SKU: TL-18 Price: $5.99
TL-5 TEST LEADS Stackable Banana to Alligator Clip SKU: TL-5 Price: $3.99	TL-3 TEST LEAD BNC to Mini Grabber SKU: TL-3 Price: $2.99	TL-17 TEST LEAD BNC to Alligator Clips SKU: TL-17 Price: $4.99
TPI A407 110-220 volt charger for 460 Scope SKU: A407 Price: $59.95