It’s a build it yourself 3D printer kit to print objects of maximum 20 x 20 x 20 cm using PLA or ABS filament (3 mm plastic wire). It is an extremely fast, reliable and precise printer even when printing at higher speeds. The K8200 is compatible with all free RepRap software and firmware. It is made out of aluminum and easy to assemble leaving room for modifications. The print bed is heated.

)

• Linear ball bearings: 8 and 10 mm (0.314” and 0.393”)
  
• Technology: FFF (Fused Filament Fabrication) for PLA & ABS
  
• Power supply: 12 V / 3 A max.
  
• FTDI USB 2.0 to Serial
  
• Dimensions of printable area: 20 x 20
  
• 20cm / 7.87 x 7.87 x 7.87”
  
• Typical printing speed: 120 mm/s
  
• Maximum print speed: 150 to 300 mm/s
  
• Extrusion nozzle: 0.5 mm
  
• Extrusion thermistor: NTC 100K
  
• Extruded aluminum profiles: 27.5 mm / 1.08” wide
  
• Movement: 4 NEMA 17 stepper motors
• Nominal mechanical resolution:
• X and Y: 0.015 mm / 590.55 µin (smallest step the printing plate
  can move in the X and Y direction)
  
• Z: 0.781 µm / 30.74 µin(smallest step the printing plate can
  move in the Z direction)
  Nominal printing resolution:
  
• Wall thickness (X,Y): 0.5 mm / 0.019”
  
• Layer thickness (Z): 0.20 - 0.25 mm / 0.0078 - 0.0098”
  Dimensions:
  
• Width: 50cm / 19.7”
  
• Depth: 42cm / 16.5”
  
• Height: 62cm / 24.4”
  
• Weight: 9Kg / 19.84lbs